Planning

Sunday, September 1, 2019

Time Event  
16:00 - 18:00 On-site registration opening  
18:00 - 21:00 Welcome buffet - Welcome buffet  

Monday, September 2, 2019

Time Event  
08:00 - 09:00 Welcome / Registration  
09:00 - 09:20 Opening and Welcome address (Room 2+3: Saint Maur / Essarts)  
09:20 - 10:00 Cartilage, Contacts and Catheters (Room 2+3: Saint Maur / Essarts) - Nicholas Spencer
 
10:00 - 10:30 Coffee break  
10:30 - 11:10 Thin Film Lubrication: Molecular Behaviours of Confined Liquids (Room 2+3: Saint Maur / Essarts) - Jianbin Luo
 
11:10 - 11:50 Oral Friction and Texture Perception of Food: Red Wine, Chocolate and Cream (Room 2+3: Saint Maur / Essarts) - Philippa Cann
 
11:50 - 12:10 Group picture  
12:10 - 13:40 Lunch (Restaurant / Ormes /Cèdres)  
13:40 - 15:20 1.1 In-situ measurements (Room 1: Amphitheater) - M. Hartl  
13:40 - 14:00 › High-resolution LIF-imaging of the oil film thickness in the piston-ring / cylinder-liner contact in an optical tribometer - Jiyeon Cheong, Department of Tribology, R&D, Daimler AG, Ulm, Germany
main file
14:00 - 14:20 › Switchable friction at randomly rough multi-asperity interfaces through capillary condensation? - Bart Weber, Advanced Research Center for Nanolithography, Amsterdam
main file
14:20 - 14:40 › Electrical probing of sheared metallic rough interfaces - Eddy Chevallier, Laboratoire "Physique des Systèmes Complexes" (PSC - EA 4663)
main file
14:40 - 15:00 › Frictional sliding of an elastomeric/glass contact: experimental study of real contact area - Mariana de Souza, Laboratoire de Tribologie et Dynamique des Systèmes
main file
15:00 - 15:20 › Real-time measurements of piston ring and liner lubrication and lube oil inlet viscosity in a marine diesel engine using ultrasound - Henry Brunskill, Department of Mechanical Engineering
main file
13:40 - 15:20 2.1 Modelling Nanoscale (Room 2: Saint Maur) - H. Washizu  
13:40 - 14:00 › Morphology-dependent friction of adsorption films: Molecular Dynamics of SDS and CTAB at the H₂O | Au(111) interface - Johannes Hörmann, Department of Microsystems Engineering, University of Freiburg, Georges-Köhler-Allee 103, 79110 Freiburg
main file
14:00 - 14:20 › Frictional regimes on some particular nature-inspired aperiodic atomic chains - Andras Vernes, Austrian Center of Competence for Tribology, Institute of Applied Physics, Vienna University of Technology
main file
14:20 - 14:40 › Phononic excitations during sliding friction - Jan Grießer, Department of Microsystems Engineering - IMTEK
main file
14:40 - 15:00 › MD simulations of friction and wear of fuel surrogates - Judith Harrison, United States Naval Academy
main file
15:00 - 15:20 › Wettability@Al2O3: A molecular modeling study of adsorption of lubricant additives - Sarah Blanck, Univ Lyon, Ecole Normale Supérieure de Lyon, CNRS Université Lyon 1, Laboratoire de Chimie, TOTAL, Centre de recherche de Solaize
main file
13:40 - 15:20 3.1 Seal 1 (Room 3: Essarts) - N. Brunetière  
13:40 - 14:00 › Design and analysis of a hydraulically controllable mechanical seal for nuclear applications - Richard Salant, Georgia Institute of Technology
main file
14:00 - 14:20 › Models for two-component lubrication flow - John TICHY, Rensselaer Polytechnic Institute
main file
14:20 - 14:40 › Transportation of liquid and dissolved gas and their dependence on surface topography in radial shaft seal - Joichi Sugimura, Kyushu University
main file
14:40 - 15:00 › Optical investigations into rotating and oscillating radial lip seal contacts - Bengt Wennehorst, Leibniz Universität Hannover, Institute for Machine Design and Tribology (IMKT)
main file
15:00 - 15:20 › Numerical modelling of a grease lubricated pneumatic seal - Aurelian Fatu, Institut Pprime
main file
15:20 - 15:50 Coffee break  
15:50 - 17:30 1.2 Micro and nano-tribology (Room 1: Amphitheater) - R. Bennewitz  
15:50 - 16:10 › The evolution of surface damage on NiAl-Bronze due to cavitation of repeated single laser-induced bubbles - Stefanie Hanke, ITM, University of Duisburg-Essen
main file
16:10 - 16:30 › Non-linear dynamical effects in frictional energy dissipation - Motohisa Hirano, Hosei University
main file
16:30 - 16:50 › Severe deformation of pearlitic steel during microscale tribology - Steffen Brinckmann, Max-Planck-Institut für Eisenforschung
main file
16:50 - 17:10 › Enhancing of CuO nanolubricant performance using organic dispersants - Valdicleide Mello, Federal University of Espirito Santo - Salete Alves, Federal University of Rio Grande do Norte
main file
17:10 - 17:30 › The effect of micro-EHL at asperity scale on the simulated Stribeck curve of conformal contact mixed lubrication - Yuechang Wang, University of Leeds, State Key Laboratory of Tribology, Tsinghua University
main file
15:50 - 17:30 2.2 Modelling - Fluid lubrication (Room 2: Saint Maur) - W. Seemann  
15:50 - 16:10 › Grease flow based on a two-component mixture model - John TICHY, Rensselaer Polytechnic Institute
main file
16:10 - 16:30 › Numerical Simulation of Hydrodynamic Lubrication by SPH Method - Kentaro Tanaka, Tokyo University of Marine Science and Technology
main file
16:30 - 16:50 › Characterization of grease aging based on chemical and mechanical degradations - Camella Oumahi, Agence d'Essai Ferroviaire
main file
16:50 - 17:10 › Hydrodynamic lubrication theory for an exact Bingham plastic fluid model - Stefan Lampaert, Delft University of Technology, Faculty 3mE, Department PME
main file
17:10 - 17:30 › Viscosity Index Improvers from first-principles in-silico screening - Andres Jaramillo-Botero, California Institute of Technology
main file
15:50 - 17:30 3.2 Seal 2 (Room 3: Essarts) - R. Salant  
15:50 - 16:10 › Cavitation in a wavy mechanical seal - Noël BRUNETIERE, Institut P' CNRS - Université de Poitiers - ENSMA UPR 3346 SP2MI
main file
16:10 - 16:30 › Film formation and temperature development in textured rectangular face seals - Dilek Bulut, Institut für Konstruktion und Tribologie, Leibniz Universitaet Hannover
main file
16:30 - 16:50 › Thin film lubrication of a hydraulic rod seal - experimental study using ellipsometry - Oliver Feuchtmüller, Institute of Machine Components - University of Stuttgart
main file
16:50 - 17:10 › Hydrodynamic lubrication of parallel surfaces with random roughness and grooves - Wan Ma, Jiangsu Normal University, School of Mechatronic Engineering, Xuzhou, 221116
main file
17:10 - 17:30 › Gas flow visualization on dry gas seal with vibration - Masayuki Ochiai, Tokai University
main file
18:00 - 18:30 Concert - J. Tichy (part I) - Concert - J. Tichy (part I)  
18:30 - 19:30 Poster session (Big Top (outside))  
19:30 - 20:45 Wine & cheese party - Wine & cheese party  
20:45 - 21:30 Concert - J. Tichy (part II) - Concert - J. Tichy (part II)  

Tuesday, September 3, 2019

Time Event  
08:30 - 09:00 Invited 1 - F. Massi (Room 1: Amphitheater) - D. Philippon  
08:30 - 09:00 › Tactile perception and the role of friction-induced vibrations - Francesco Massi, Department of Mechanical and Aerospace Engineering, ‘‘La Sapienza'' University of Rome
main file
08:30 - 09:00 Invited 2 - J. Wollbrett-Blitz (Room 2: Saint Maur) - J. Fontaine  
08:30 - 09:00 › From fibre coating to Hair cosmetic properties: Tribology in daily hairy life - Judith Wollbrett-Blitz, Hair Advanced Research, L'Oréal
main file
08:30 - 09:00 Invited 3 - T. Hirayama (Room 3: Essarts) - C. Minfray  
08:30 - 09:00 › Neutron and AFM studies for understanding of boundary lubrication - Tomoko Hirayama, Faculty of Engineering, Kyoto University
main file
09:10 - 10:10 4.1 Tactile perception (Room 1: Amphitheater) - F. Massi  
09:10 - 09:30 › Tribological interactions related to the tactile perception of deterministic micro-textured surfaces - Pierre-Henri Cornuault, Femto-ST Institute, Department of Applied Mechanics, UBFC, CNRS UMR 6174, Besançon, France
main file
09:30 - 09:50 › Fingertip friction and tactile perception of surface structure - Roland Bennewitz, Leibniz Institute for New Materials
main file
09:50 - 10:10 › Loading Response to Frctional Stimulus Applied to a Finger Sliding against Glass Surfaces Striped with a Molecular Layer - Saiko Aoki, Tokyo Institute of Technology
main file
09:10 - 10:10 5.1 Everyday life: Sport tribology (Room 2: Saint Maur) - J. Wollbrett-Blitz  
09:10 - 09:30 › New insights in the physics of ice skating - Rinse Liefferink, Institute of Physics, University of Amsterdam
main file
09:30 - 09:50 › Experimental evidence of friction effect involved in playing French billiard - Sylvie Descartes, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne]
main file
09:50 - 10:10 › A model to predict the friction forces generated during skiing on artificial ski matting - Ian Sherrington, University of Central Lancashire
main file
09:10 - 10:10 6.1 EHL 1 (Room 3: Essarts) - T. Hirayama  
09:10 - 09:30 › Fast traction prediction in rolling/sliding EHL contacts - Haichao Liu, Institute of Machine Design and Tribology
main file
09:30 - 09:50 › EHL modeling of anisotropic material for point contacts - Bin Bin Zhang, University of Twente [Netherlands]
main file
09:50 - 10:10 › Lubricant viscoelasticity: is it of any relevance to quantitative EHL friction predictions? - Wassim Habchi, Lebanese American University, Department of Industrial and Mechanical Engineering
main file
10:10 - 10:30 Coffee break  
10:30 - 12:10 4.2 Surface topography (Room 1: Amphitheater) - A. Soom  
10:30 - 10:50 › Loss of contact of a rough slider on a rough surface upon increased dry sliding speed - Julien scheibert, Laboratoire de Tribologie et Dynamique des Systèmes
main file
10:50 - 11:10 › Interference effect of large and small grooves on the real contact area growth of one-dimensional regular wavy surface - Kenji Matsuda, Kyushu Institute of Technology
main file
11:10 - 11:30 › Wetting simulation on rough surfaces by lattice Boltzmann method - Vincent Neyrand, Laboratoire de Tribologie et Dynamique des Systèmes
main file
11:30 - 11:50 › In-liquid AFM observation of rubbing surface in CVT fluid - Ayako Omura, National Institute of Advanced Industrial Science and Technology
main file
11:50 - 12:10 › Improving processing quality and tribological behavior of laser surface textures using oil mask method - Hui ZHANG, Xián Jiaotong University
main file
10:30 - 12:10 5.2 Abrasion and Scratch (Room 2: Saint Maur) - T. Blanchet  
10:30 - 10:50 › Scratch resistance of floor covering surfaces - Benoît Wittmann, MINES ParisTech, PSL Research University
main file
10:50 - 11:10 › Investigation on the wear resistance of geocorail: a new natural concrete - Agnès Fabre, Mechanics surfaces and materials processing
main file
11:10 - 11:30 › Scratch damage of aluminium surfaces – Assessment of damage mechanisms on different scales - Andreas Pauschitz, AC2T research GmbH
main file
11:30 - 11:50 › Characterization of varnish / nylon fibre adhesion - Meriem BENZARTI, Laboratoire de Physique et Mécanique Textiles
main file
11:50 - 12:10 › Abrasion wear resistance of modified Hadfield steels - Luis Varela, Metallurgical and Materials Engineering Department, University of São Paulo, Av. Prof. Mello Moraes 2463, 05508-030 São Paulo, SP, Brazil, Technological Institute Vale
main file
10:30 - 12:10 6.2 EHL 2 (Room 3: Essarts) - I. Krupka  
10:30 - 10:50 › Engine tribology in daily life - Malcolm Fox, Nylacast Ltd, University of Bradford
main file
10:50 - 11:10 › Experimental study of the mixed-elastohydrodynamic transition with low viscosity lubricants - Yann ALEXANDRE, Laboratoire de Tribologie et Dynamique des Systèmes
main file
11:10 - 11:30 › Changes in cavitation and contact oil film due to increase in peripheral velocity in traction drive under high load - Hayato Taira, Graduation school of Engineering, tokai University
main file
11:30 - 11:50 › Fundamental aspects of friction in starved EHL contact - Petr Sperka, Brno University of Technology
main file
11:50 - 12:10 › Friction of PEEK with steel counterparts in EHL and mixed lubrication - Go Tatsumi, Lubricants R&D Dept., JXTG Nippon Oil & Energy Corporation, National Centre for Advanced Tribology at Southampton (nCATS), University of Southampton
main file
12:10 - 13:40 Lunch (Restaurant / Ormes /Cèdres)  
13:40 - 15:20 4.3 Coating 1 (Room 1: Amphitheater) - N. Doerr  
13:40 - 14:00 › In situ obsevation of friction induced structural change - YUYA HAYASHI, DENSO CORPORATION
main file
14:00 - 14:20 › The role of TiC renforcement on the friction and wear of cold sprayed Ti6Al4V coatings - Venkata Naga Vamsi Munagala, McGill University
main file
14:20 - 14:40 › The impact of biofuels on the running-in of a thermal spray coating - Dominic Linsler, MikroTribologie Centrum
main file
14:40 - 15:00 › Evaluation of the cutting forces of a thermal spray coating by scratch test in different orientations - Marcionila Santos, University of São Paulo
main file
15:00 - 15:20 › An alternative to hard chrome plating by using thermal spraying for various tribological conditions - CELINE TREVISIOL, Cetim, Laboratoire Tribologie, Pôle Matériaux Métalliques et Surface, Senlis, France.
main file
13:40 - 15:20 5.3 Biotribology 1 (Room 2: Saint Maur) - N. Spencer  
13:40 - 14:00 › Effects of mucin on medical glove tribology and performance - Daniel Preece, University of Sheffield
main file
14:00 - 14:20 › Nanotribology of pearls – Influence of the organics' content on the frictional dissipation of sheet nacre - Philippe STEMPFLE, Institut FEMTO-ST
main file
14:20 - 14:40 › The tribological properties of methyl cellulose as a model oviductal fluid - Anjana Kothandaraman, The University of Birmingham
main file
14:40 - 15:00 › Sustained release of agarose-hyaluronan hydrogel with anti-friction performance - Mahshid Hafezi, Key Laboratory of Education Ministry for Modern Design and Rotor-Bearing System, Institute of Design Science and Basic Components. School of Mechanical Engineering, Xi'an Jiaotong University
main file
15:00 - 15:20 › Protein film formation and its protective role on dental tissues under tribological and acidic conditions - Pravin Smart, University of Leeds
main file
13:40 - 15:20 6.3 Texturation (Room 3: Essarts) - M. Kalin  
13:40 - 14:00 › Lubrication characteristic of surface texturing under reciprocating motion - Tetsuta Matsumura, Tokyo University of Marine Science and Technology
main file
14:00 - 14:20 › Effects of dimple shape and arrangement pattern on oil film pressure between two sliding surfaces - Furuki Tsubasa, University of Fukui
main file
14:20 - 14:40 › Effects of thermal deformations on textured thrust bearings optimally designed by isothermal and THD calculation methods - Anastassios Charitopoulos, National Technical University of Athens, Institut Pprime
main file
14:40 - 15:00 › Bearing characteristic of journal bearing applied biomimetics - Kairi Goto, Graduate School of Engeneering. Tokai University
main file
15:00 - 15:20 › Numerical and experimental optimization of surface textures through the adjoint method - Andrea Codrignani, Department of Microsystem Engineering IMTEK, Albert-Ludwigs-University Freiburg, Freiburg, Germany
main file
15:20 - 15:50 Coffee break  
15:50 - 17:50 4.4 Coating 2 (Room 1: Amphitheater) - S. de Beer  
15:50 - 16:10 › Nanotribological investigation of wear mechanisms on transition metal dichalcogenide thin coatings - Ales Rapuc, National Centre for Advanced Tribology, Faculty of Engineering and Physical Sciences, University of Southampton
main file
16:10 - 16:30 › Lab scale optimization of dc magnetron sputtered C doped MoSe2 solid lubricant coatings - Talha bin Yaqub, SEG-CEMMPRE, Department of Mechanical Engineering, University of Coimbra, Rua Luís Reis Santos, 3030-788 Coimbra, Portugal, IPN - LED & MAT - Instituto Pedro Nunes, Laboratory of Tests, Wear and Materials, Rua Pedro Nunes, 3030-199 Coimbra, Portugal
main file
16:30 - 16:50 › Superlubricity and super wear: tribochemical interaction of hydrogen-free tetrahedral amorphous carbon coatings (ta-C) with oleic acid - Stefan Makowski, Fraunhofer Institute for Material and Beam Technology
main file
16:50 - 17:10 › Tribology of amorphous metallic alloys: tribochemically or mechanically driven? - Guillaume Colas, Franche-Comté Électronique Mécanique, Thermique et Optique - Sciences et Technologies (UMR 6174)
main file
17:10 - 17:30 › Tribological behavior of CrN coatings deposited by RAAMS under lubricated reciprocating ring on plane condition - Newton Fukumasu, University of São Paulo
main file
17:30 - 17:50 › Tribological behaviour in diverse testing environments of a self-lubricant W-S-C coating deposited by CFUBMS - Todor Vuchkov, SEG-CEMMPRE, Department of Mechanical Engineering, University of Coimbra, Rua Luís Reis Santos, 3030-788 Coimbra, Portugal, IPN - LED & MAT - Instituto Pedro Nunes, Laboratory for Wear, Testing and Materials, Rua Pedro Nunes, 3030-199 Coimbra, Portugal
main file
15:50 - 17:50 5.4 Biotribology 2 - human joints (Room 2: Saint Maur) - A. Neville  
15:50 - 16:10 › Influence of contact load on tribological behavior of poly(vinyl alcohol) hydrogels as artificial cartilage material - Seido Yarimitsu, Faculty of System Design, Tokyo Metropolitan University
main file
16:10 - 16:30 › Interface design of ADLC coatings for application in total hip replacement bearings - Andrew Robert Beadling, University of Leeds
main file
16:30 - 16:50 › Structural and lubrication properties of the hydration layer of articular cartilage - Shingo Miura, Tokyo Metropolitan University [Tokyo]
main file
16:50 - 17:10 › Influence of collagen structure on the mechanical property of articular cartilage - Tatsuya Takahashi, Tokyo Metropolitan University [Tokyo]
main file
17:10 - 17:30 › Orientation based frictional performance of micro-groove cross hatched textures for metal-on-ceramic hip implant - Vivek Kashyap, Machine Design Section, Department of Mechanical Engineering, Indian Institute of Technology Madras
main file
15:50 - 17:50 6.4 Bearings: rolling and plain (Room 3: Essarts) - M. Fillon  
15:50 - 16:10 › Comparison between numerical and experimental results of the skew angle in tapered rolling bearings - Fida Majdoub, NTN-SNR ROULEMENTS [Annecy]
main file
16:10 - 16:30 › Investigation of subsurface microstructural alterations in steel bearings due to rolling contact fatigue - Mostafa El Laithy, University of Southampton [Southampton]
main file
16:30 - 16:50 › Optimization performance of plain journal bearings with partial wall slip zone - Shuhui CUI, Institut Pprime, Harbin Institute of Technology
main file
16:50 - 17:10 › Lubricant formulation: a driver for early bearing damage associated to white etching cracks? - arnaud ruellan, SKF Research & Technology Development
main file
17:10 - 17:30 › Experimental investigations on REB thermal behaviour - Pierre Brossier, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne], LabECAM
main file
17:30 - 17:50 › Tribological optimization of single and double slope marine stern tube bearings: A case study - Georgios Nikitas Rossopoulos, School of Naval Architecture and Marine Engineering [Athens], National Technical University of Athens
main file
18:30 - 23:00 Banquet (last bus departure 18:30)  

Wednesday, September 4, 2019

Time Event  
08:30 - 09:00 Invited 4 - S. Mischler (Room 1: Amphitheater) - A. Saulot  
08:30 - 09:00 › Tribocorrosion of biomedical implants - Stefano Mischler, Tribology and Interfacial Chemistry Group - EPFL
main file
08:30 - 09:00 Invited 5 - H. Washizu (Room 2: Saint Maur) - N. Fillot  
08:30 - 09:00 › Molecular simulations for additives and coatings - Hitoshi Washizu, Graduate School of Simulation Studies, University of Hyogo
main file
08:30 - 09:00 Invited 6 - S. de Beer (Room 3: Essarts) - P. Vergne  
08:30 - 09:00 › Lubricious coatings for precision positioning of medical needles - Sissi De Beer, Materials Science and Technology of Polymers, Twente University
main file
09:10 - 10:10 7.1 Physico-chemistry (Room 1: Amphitheater) - S. Mischler  
09:10 - 09:30 › Velocity-dependence of tribologically-induced oxidation of high-purity copper - Julia Lehmann, Karlsruhe Institute of Technology (KIT), MicroTribology Center µTC, Karlsruhe Institute of Technology (KIT), Intstitute for Applied Materials (IAM)
main file
09:30 - 09:50 › The role of tribo-chemical processes in the friction and wear behavior of contacts in nanolithographic systems - Fiona Elam, ARCNL
main file
09:50 - 10:10 › Quantification of the synergy effects between wear and corrosion of 316L stainless steel in deep-sea environment - pengwei ren, Corrosion and Protection Center, Institute for Advanced Materials and Technology, University of Science and Technology Beijing
main file
09:10 - 10:10 8.1 Phosphate based additives (Room 2: Saint Maur) - A. Morina  
09:10 - 09:30 › Effect of aged oils on ring-liner wear - Eduardo Tomanik, Surface Phenomena Laboratory of Polytechnic School of the University of São Paulo (LFS/USP
main file
09:30 - 09:50 › High resolution characterization of ZDDP tribofilm on cylindrical roller bearing by X-ray photoelectron spectroscopy and atom probe tomography - Chia-Jui Hsu, Vienna University of Technology
main file
09:50 - 10:10 › Tribological properties of maleic dithiophosphate derivatives - Saki Koyata, JXTG Nippon Oil & Energy Corporation
main file
09:10 - 10:10 9.1 Fluid and grease lubrication (Room 3: Essarts) - G. Poll  
09:10 - 09:30 › Tribological investigation on a greased contact subjected to contact dynamic instability - Ilaria Ghezzi, Laboratoire de Mécanique des Contacts et des Structures, Department of Mechanical and Aerospace Engineering, ‘‘La Sapienza'' University of Rome
main file
09:30 - 09:50 › Tribological behavior of fiber reinforced PA66 under high contact pressure and grease lubricated conditions - Takeshi Kunishima, JTEKT CORPORATION, Laboratoire de Tribologie et Dynamique des Systèmes
main file
09:50 - 10:10 › Automotive transmission efficiencies vs. NVH characteristics - an experimental study - Ajay Harinarain, General Manager (Tribology), Indian Oil Corporation Ltd. R&D Centre
main file
10:10 - 10:30 Coffee break  
10:30 - 12:10 7.2 Molybdenum based lubrication (Room 1: Amphitheater) - G. Colas  
10:30 - 10:50 › The role of MoDTC tribochemistry in engine tribology. A Raman microscopy investigation - Cayetano Espejo, Institute of Functional Surfaces. School of Mechanical Engineering. University of Leeds.
main file
10:50 - 11:10 › The effect of additive chemical structure on the tribofilms derived from varying Molybdenum-Sulfur chemistries - Aaron Barnes, Institute of Functional Surfaces, School of Mechanical Engineering, University of Leeds, LS2 9JT, UK
main file
11:10 - 11:30 › Tribofilm formation during dry sliding of graphite- and MoS2-based composites fabricated by spark plasma sintering - Michell Felipe Cano, Surface Phenomena Laboratory, Polytechnic School of the University of Sao Paulo
main file
11:30 - 11:50 › MoS2 nano sheets formation kinetics from low viscosity lubricants - Gerda Vaitkunaite, University of Leeds
main file
11:50 - 12:10 › Formation of MoS2 flakes from molybdenum dithiocarbamate-based molecules in a severe lubricated contact: toward a better understanding - Mayssa Al kharboutly, Mayssa AL kharboutly
main file
10:30 - 12:10 8.2 Organic friction modifiers (Room 2: Saint Maur) - J. Harrison  
10:30 - 10:50 › New insights in adsorption processes of lubricant additives - Jennifer Honselmann, Thomas Rühle, Patrick Wilke, Martin Dienwiebel
main file
10:50 - 11:10 › Inhibition of confinement-induced solidification of mineral oil-based lubricants - Kazushi Tamura, Lubricants Research Laboratory, Idemitsu Kosan Co., Ltd.
main file
11:10 - 11:30 › Effect of Organic Friction Modifiers on the tribological performance of engine oils - Febin Cyriac, Agency for science, technology and research [Singapore]
main file
11:30 - 11:50 › FM-AFM observation of the adsorption film structure on steel surface in oiliness additive solution - Yuko Sato, Graduate School of Tokyo University of Science
main file
11:50 - 12:10 › Contribution of hydrogen bonding to lubrication performance of polyphenylene ether - Haoyu LI, State Key Laboratory of Tribology, Tsinghua University, Beijing 100084, People's Republic of China
main file
10:30 - 12:10 9.2 Ionic liquid (Room 3: Essarts) - A. Vernes  
10:30 - 10:50 › Investigate the behavior of zwitterionic polymer brushes under different environmental conditions. - Sufia Fatima, University of Leeds
main file
10:50 - 11:10 › Ionic liquids as lubricants for steel-steel contacts in space devices - Nicole Dörr, AC2T research GmbH
main file
11:10 - 11:30 › FM-AFM observation on effect of water on adsorption layer of hydrophobic and hydrophilic ionic liquids - Shouhei Kawada, Tokyo University of Science [Tokyo]
main file
11:30 - 11:50 › Effect of ILs' chemistry on their lubrication mechanism under various sliding distances - Waleed Al-Sallami, University of Leeds
main file
11:50 - 12:10 › Glycerol/ionic liquids mixture as potential candidate for superlubricity on W-DLC surface under boundary lubrication conditions - Muhammad Shahid Arshad, Muhammad Shahid Arshad
main file
12:10 - 13:40 Lunch (Restaurant / Ormes /Cèdres)  
13:40 - 15:20 7.3 Modelling - Dry contact (Room 1: Amphitheater) - J. Tichy  
13:40 - 14:00 › Modeling noise originating at a sliding contact - Andres Soom, Mechanical and Aerospace Engineering University at Buffalo, 240 Bell Hall, Buffalo, NY 14260, USA, Department of Mechanical and Aerospace Engineering
main file
14:00 - 14:20 › Road polishing: studying the effects of traffic load, operating velocity and aggregate types - Malal Kane, IFSTTAR
main file
14:20 - 14:40 › Numerical modeling of the micromechanical anisotropy effect on friction when dry cutting of green composites - Amen-Allah CHEBBI, Mechanics surfaces and materials processing
main file
14:40 - 15:00 › Modeling of adhesion and adhesive wear: a comparison between atomistic and continuum methods - Eleir Bortoleto, Instituto Tecnógico Vale
main file
13:40 - 15:20 8.3 Fretting and oscillatory conditions (Room 2: Saint Maur) - A. Ramalho  
13:40 - 14:00 › Modeling temperature rise in multi-track reciprocating frictional sliding - Thierry Blanchet, RPI
main file
14:00 - 14:20 › Geometrical Considerations for Debris Entrapment in Closed Contacts - Jure Aleksejev, Department of Engineering Science
main file
14:20 - 14:40 › Micromechanical experiments to extract mechanical properties of a tribofilm formed in a Ti6Al4V/DLC contact by fretting - Gaylord GUILLONNEAU, Laboratoire de Tribologie et Dynamique des Systèmes
main file
14:40 - 15:00 › Effects of fretting wear on the evolution of hysteresis loops and contact interfaces - Alfredo Fantetti, Imperial College London
main file
15:00 - 15:20 › Understanding of the glaze layer formation: application to a HS25/Alumina contact subjected to fretting wear at high temperature - Alixe Dréano, Laboratoire de Tribologie et Dynamique des Systèmes, UMR5513
main file
13:40 - 15:20 9.3 Friction and wear (Room 3: Essarts) - A. Fabre  
13:40 - 14:00 › Modeling solid contact between smooth and rough surfaces with non-gaussian distributions - Tatsunori Tomota, Toyota Central R&D Labs., Inc.
main file
14:00 - 14:20 › Influence of the temperature on the wear of automotive transmission belts - Laura Montalban, Centre de Mise en Forme des Matériaux
main file
14:20 - 14:40 › Effect of rubber tread height and shape on friction - John Hale, University of Sheffield [Sheffield]
main file
14:40 - 15:00 › Friction and wear of additive manufactured polymers in dry contact application - Frank Dangnan, Tomasz Liskiewicz, Dr. Cayetano Espejo Conesa, Prof Anne Neville, Frank Dangnan
main file
15:00 - 15:20 › Particularities of tram wheels wear in four seasons climate: focus on mechanism identification & surface topography - Lukasz Wojciechowski, Poznan University of Technology - Thomas Mathia, Laboratoire de Tribologie et Dynamique des Systèmes
main file
15:20 - 15:50 Awards and closure (Room 1: Amphitheater)  
  
Online user: 1 RSS Feed